Free shipping over $99 · Free UV torch on $99–$299 orders
Free keychain light under $99 · UV torches while stocks last
Free keychain light under $99 · UV torches while stocks last
✓Free shipping over $99 | Free UV torch on $99–$299 orders(while stocks last) | Free keychain light under $99
Authorised Australian Dealer
Original price was: $554.95.$495.95Current price is: $495.95. FREE SHIPPING
5 in stock
The Nitecore TM10K fires 10,000 lumens from six CREE XHP35 HD LEDs in a body just 110mm long — a burst mode of around seven seconds that lights an entire scene at once, backed by a customisable High you can set anywhere between 400 and 2000 lumens. A multifunctional OLED shows live lumens, voltage, runtime and temperature, and two lockout modes let you disable the side buttons while keeping tail Turbo ready in a holster. Powered by a built-in 4800mAh 21700 with 35A discharge and USB-C QuickCharge 2.0. Ultralow runs 200 hours.
| Brand | Nitecore |
|---|---|
| Special Features | Rechargeable, USB-C Charging |
| Lumens | Over 3000 lumens |
| Battery Type | Built-in Battery Pack |
The TM10K is the torch Nitecore built to prove a point. Six CREE XHP35 HD LEDs behind a smooth reflector with crystal coating and Precision Digital Optics Technology produce 10,000 lumens, 20,000 candela and a 288-metre beam — from a body 110mm long weighing 246.5g with the clip. Nitecore describe it as smaller than a phone, and they are right.
Be clear about what 10,000 lumens means here. Turbo is a burst mode lasting around seven seconds — Nitecore market the torch on “10,000 lumen burst” for exactly that reason. It is there to light up a scene instantly, not to run continuously, and there is no torch this size that could sustain it. What you get afterwards is High at a default 1000 lumens for 1 hour 45 minutes, which is a genuinely useful working output.
The feature that makes the TM10K unusual is that High is customisable. You can set it anywhere between 400 and 2000 lumens in 100-lumen increments and it stays there. Rather than accepting whatever levels the manufacturer chose, you tune the torch to the brightness your work actually needs and the runtime you want from it. Below that sit Mid at 300 lumens for 5 hours 45, Low at 100 lumens for 12 hours, and Ultralow at 3 lumens running up to 200 hours.
A multifunctional OLED display reports output in lumens, battery voltage, remaining runtime and temperature in real time, plus a progress bar while Turbo is running and charging status when plugged in. Two thermal sensors monitor the LEDs and the system separately, feeding Nitecore’s Advanced Temperature Regulation so the torch calculates output and remaining runtime against actual conditions rather than a fixed table. Heat is carried away by a 4mm copper circuit board and a die-cast unibody cooling tube — necessary engineering when six XHP35s fire at once.
Three metal buttons handle everything: power and mode on the side, plus a tail switch for instant Turbo, with direct access to High and Ultralow. Two lockout modes cover different carry situations — full lockout for a pack, and half lockout which disables the side buttons but leaves the tail Turbo switch live, for pocket or holster carry where you might need light immediately.
Power comes from a built-in 4800mAh 21700 Li-ion cell capable of 35A discharge — roughly twice the capacity of a conventional IMR18650, and the current capability is what makes the burst possible. It is welded in and not user-replaceable, so this is a torch with a finite service life rather than one you re-cell. Charging is USB-C with QuickCharge 2.0 at up to 18W; the display shows “Q.charge” when a QC adapter is detected. The torch cannot be operated while charging.
The body is aero-grade aluminium with a deep pocket clip, and a holster, lanyard and USB-C cable are supplied.
Key Features
Specifications
| Specification | Detail |
|---|---|
| LEDs | 6 × CREE XHP35 HD |
| Optics | Smooth reflector, crystal coating, Precision Digital Optics Technology (PDOT) |
| Max Output | 10,000 lumens (burst, approx. 7 seconds) |
| Peak Beam Intensity | 20,000 candela |
| Beam Distance | 288 metres |
| Turbo | 10,000lm — burst mode |
| High | 1000lm default / 1hr 45min — customisable 400–2000lm in 100lm steps |
| Mid | 300lm / 5hr 45min |
| Low | 100lm / 12hr |
| Ultralow | 3lm / up to 200hr |
| Display | Multifunctional OLED — lumens, voltage, runtime, temperature, charge status |
| Thermal Management | Two thermal sensors with ATR, 4mm copper PCB, die-cast unibody cooling tube |
| Controls | Side power and mode buttons plus tail switch for instant Turbo |
| Lockout | Full lockout and half lockout (tail Turbo remains live) |
| Battery | Built-in 4800mAh 21700 Li-ion, 35A discharge — not user-replaceable |
| Charging | USB-C with QuickCharge 2.0, up to 18W |
| Length | 110mm / 4.33 in |
| Head Diameter | 41mm / 1.61 in |
| Weight | 246.5g / 8.7oz (including clip) |
| Body Material | Aero-grade aluminium alloy |
| Includes | Torch, holster, pocket clip, lanyard, USB-C cable |
Use Cases / Ideal For
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.