Free shipping + free UV torch over $99 (while stocks last)
Free keychain light on orders under $99
Free keychain light on orders under $99
✓Free shipping + free UV torch over $99(while stocks last) | Free keychain light on orders under $99
Authorised Australian Dealer
Original price was: $499.95.$479.95Current price is: $479.95. FREE SHIPPING
5 in stock (can be backordered)
The Multi-Light-Source X80GT 3 carries 24 LEDs: 18 cool-white for 23,000 lumens at 401 metres, 4 × 660nm deep red that protects dark-adapted vision, and 2 × 365nm UV at 1,300mW for fluorescence detection — plus a CRI 95+ side light that runs alone or synced with the main beam. Non-PWM flicker-free dimming, an FCCM constant-current driver, a three-position magnetic lock, a detachable handle and a UNC ¼” tripod socket. Powered by a swappable 4 × 18650 compartment — no onboard charging, so an external charger is required. IP68 rated.
| Brand | Acebeam |
|---|---|
| Lumens | Over 3000 lumens |
| Battery Type | 18650 |
| Colour Temperature | 6500K |
| Special Features | High CRI, Red Light, Long Range, Strobe, UV detection light |
| Waterproof Rating | IP68 |
This is the Multi-Light-Source version of the X80GT 3 — the configuration built for work where white light alone is not enough. 24 LEDs in total: 18 cool-white producing up to 23,000 lumens, 4 red at 660nm, and 2 UV at 365nm, plus a separate high-CRI side light. All of it in a body 119.3mm long weighing 556.7g.
The white beam reaches 401 metres at 40,200 candela. Six levels run from Ultra Low at 100 lumens for 21 hours through to Turbo at 23,000 lumens, which holds for 30 seconds before stepping to a sustained 3,200 lumens for 1 hour 51, then 100 lumens for a further 70 minutes. High gives 10,000 lumens for 4 minutes then the same sustained pattern, and Med 2 delivers 5,100 lumens for 20 minutes before settling. It is a searchlight: the headline figures are burst outputs and the sustained 3,200 lumens is the number to plan around.
The red light is the reason this version exists. Four 660nm emitters give 400, 130 and 20 lumens with runtimes of 4h38m, 15h23m and 88 hours. 660nm is deep red — it preserves dark-adapted vision far better than the orange-red most torches use, which matters enormously when you are working underground or observing at night and cannot afford to lose your night vision every time you need light.
The 2 × 365nm UV emitters run at 1,300mW on High for 11 hours, 400mW for 35 hours, and 64mW for 158 hours. That is a serious UV output — enough for fluorescence detection on rock walls, mineral identification, and inspection work, at the 365nm wavelength that produces clean fluorescence rather than a violet wash.
A separate high-CRI side light at 6500K and CRI 95+ lights your immediate surroundings without blinding you — 80 lumens for 32 hours, 30 lumens for 115 hours, or 4 lumens for 470 hours. It runs on its own or synchronised with the main beam, so you can have distant and close-range light at once.
Output quality is handled by an FCCM boost constant-current driver and non-PWM dimming — completely flicker-free, which matters over long sessions and when filming. The lens is 4mm anti-reflective glass.
An important point about power. This version uses a swappable 4 × 18650 3000mAh high-drain battery compartment with replaceable cells, so a spare set restores full runtime in seconds in the field. It does not have the built-in pack and 60W USB-C charging of the White Light version — you will need an external charger. For expedition and caving work that trade is usually the right way round, but it is worth knowing before you order.
A three-position magnetic mechanical lock handles safety and mode selection. Carry it handheld, by the patented detachable handle, or mount it on a tripod via the UNC ¼” threaded socket. The torch is rated IP68 for waterproof and dustproof protection.
Key Features
Specifications
| Specification | Detail |
|---|---|
| Version | Multi-Light-Source (cool white, red and UV) |
| Light Sources | 18 × cool-white LED · 4 × 660nm red · 2 × 365nm UV · high-CRI side light |
| Max Output | 23,000 lumens |
| Peak Beam Intensity | 40,200 candela |
| Beam Distance | 401 metres |
| Turbo | 23,000 → 3,200 → 100lm / 30s + 1hr 51min + 70min / 401m |
| High | 10,000 → 3,200 → 100lm / 4min + 1hr 45min + 70min / 210m |
| Med 2 | 5,100 → 3,200 → 100lm / 20min + 1hr 35min + 70min / 147m |
| Med 1 | 1,850 → 100lm / 3.5hr + 70min / 78m |
| Low | 450 → 100lm / 11hr + 70min / 39m |
| Ultra Low | 100lm / 21hr 22min |
| Strobe | 23,000 → 3,200lm / 80s + 4hr 10min |
| Red (660nm) | 400lm (4hr 38) · 130lm (15hr 23) · 20lm (88hr 10) |
| UV (365nm) | 1,300mW (11hr) · 400mW (35hr) · 64mW (158hr) |
| Side Light | 6500K CRI 95+ — 80lm (32hr) · 30lm (115hr) · 4lm (470hr) |
| Dimming | Non-PWM, flicker-free |
| Driver | FCCM boost constant current |
| Lens | 4mm anti-reflective glass |
| Battery | Swappable 4 × 18650 3000mAh high-drain compartment, replaceable cells |
| Charging | None onboard — external charger required |
| Lock | Three-position magnetic mechanical lock |
| Mounting | Detachable handle · UNC ¼” threaded socket |
| Length | 119.3mm |
| Weight | 556.7g |
| Waterproof Rating | IP68 |
Use Cases / Ideal For
